Remove Backup Exec 2012 Licenses

In Backup Exec 2012, you can’t remove the product license from “Install Optoins and Licenses on this Backup Exec Server”, you can however remove the maintenance for any products you have installed.

If you want to remove the product license, you will need to do perform a number of steps.

First off you should stop all services for Backup Exec

Run Backup Exec Services Manager from “C:\Program Files\Symantec\Backup Exec\ServicesMgr.exe” and click “Stop all services”

Backup Exec Services Manager 001

Once the services have stopped, navigate to either of the following file locations depending on your OS

Windows Server 2008 and Above

C:\ Program Data\Symantec Shared\Licenses and C:\Users\All Users\Symantec Shared\Licenses

Windows Server 2003

C:\Program Files\Common Files\ Symantec Shared\Licenses

Delete the .SLF files from the following location from either of the above file locations, these are the license files for Backup Exec.

After you have deleted the files, you must restart the Backup Exec services again.

If you have any questions, comments or suggestions, please let me know by leaving a message or hitting me up on twitter.

@PCVirus_AU
Titan Solutions

How To: Clear download cache in Symantec LiveUpdate

If you suspect that you might have a corrupt update downloaded from Symantec LiveUpdate, or just because you want to clear all update downloads out of your system, you can do this from inside LiveUpdate.

When you first load LiveUpdate, click “options” and then “configure”.

LiveUpdate 005

Select the “Update Cache” tab

LiveUpdate 006

Click on “Remove All Files From Cache”

LiveUpdate 007

Once completed you will get the following message box indicating that it has successfully deleted files from download cache.

LiveUpdate 008

If you have no files to delete in the download cache, the “Remove All Files From Cache” button will be greyed out.

LiveUpdate 009

And that’s all there is too it.

If you have any questions, comments or suggestions, please let me know by leaving a message or hitting me up on twitter.

@PCVirus_AU
Titan Solutions

Backup Exec 2012 – An attempt to take a snapshot of a virtual machine failed because it was unable to quiesce an application

Over the weekend one of my backup jobs failed. This job backs up a number of virtual machines in vCenter to tape.

What had happened was that while doing a snapshot for one of the servers, it took longer then expected and timed out.

BE2012 Error

First off, you will need to check your installed updates, you can do this by clicking on the Backup Exec menu button, and then going to “Installation and Licensing” and then “Installed Updates”

BE2012 Error 004

The Hotfix you need to make sure that is installed in “Hotfix 199866”. Once this is installed you can go on to make the required registry changes.

BE2012 Error 002

Next shutdown the Backup Exec services by running the “Backup Exec Services Manager” from “C:\Program Files\Symantec\Backup Exec\ServicesMgr.exe” or whatever your install location is.

Click “Stop all services” to…. um, stop all services

Backup Exec Services Manager

Once the services have stopped. load up regedit32.exe and navigate to “HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Backup Exec for Windows\Backup Exec\Engine\VMWare Agent “

You will need to create the following keys:

    1. “Snapshot retry interval” value data = 60
    2. “Snapshot retry attempts” value data = 5
    3. “Use hybrid snapshot method” value data = 1

All keys are DWORD (32-bit), set to Hexadecimal and are case sensitive.BE2012 Error 003

Once you have made the registry changes reboot the server for good measure and your done.

The increase in attempts and the retry interval should be long enough to fix the timeout problem when Backup Exec is creating snapshots in vCenter.

If you have any questions, comments or suggestions, please let me know by leaving a message or hitting me up on twitter.

@PCVirus_AU
Titan Solutions

Backup Exec Deduplication Assessment Tool

If your a Symantec partner, you have access to the Backup Exec Deduplication Assessment Tool. The Backup Exec Deduplication Assessment Tool (BEDAT) can be run to show your customers the benefits of the deduplication option in Backup Exec 2012.

BEDAT is available for partners to download at the Symantec PartnerNet site. If you are an end user interested in seeing how deduplication can be of benefit to your environment, please contact a local Symantec partner.

BEDAT is a stand alone executable that will install a temporary deduplication agent to any servers selected in the assessment process.

002

To select servers to include in the deduplication assessment, click on “Add Server”, this will open a Add Server window box.

You can also tick the “Include this local Server for deduplication assessment” if you want to include the local server (Obviously).

003

When adding a server, you can either type in the server name or IP address, or browse the network and add your servers that way. Once you has selected your server, you will need to provide the logon credentials for that server so it can access and install the temporary deduplication agent on this server.

005

Once you have added the servers you want to run the tool on, click next to continue

006a

When selecting your resources, you can select all resources or specify which drives on which servers you want to analyse.

You will also need to make sure that you have at least 1GB of free disk space for every 1TB of data you’re scanning. You can browse or type in a new folder path for the storage of the deduplication temporary data.

008a

Depending on how much data you need to analyse, the assessment progress can take anything from several minutes to several hours.

009

Once complete, you can specify the storage information, the backup strategy is either Weekly Full with Daily incremental or Daily Full Backups. The data retention period can be set to weeks, months or years.

You can also fill in your partner information, which will be included in the report.

011

On this final screen, you can enlarge the view of the report, print or save it. The file is saved as an XPS file

012

The report is broken down into 4 sections, Overall Storage Savings, Storage Savings by Resources, Storage Savings by Servers and Deduplication Failures by Servers.

As you can see by the report, this assessment shows that I can save 68.8% or 27GB of savings on storage. The backup data size can be reduced from 39 GB down to 12 GB with deduplication. It also shows the deduplication ratio which is 3.2:1 in this case.

013a

The next 3 sections shows a more detailed breakdown of the overall savings, including the deduplication rate per server.

There is was deduplication failures in this assessment.

014a

The very last section of the report is a list of the Backup Exec Deduplication Option requirements.

015

If you have any questions, comments or suggestions, please let me know by leaving a message or hitting me up on twitter.

@PCVirus_AU
Titan Solutions

Virtual Machine Backup and Recovery: Five Critical Decisions

Mays Google+ Hangout by Symantec Backup Exec is on the 5 critical decisions when considering a backup and recovery solution and based on whitepaper by Mahmoud Magdy, Thomas Maurer and Mikko Mykyri.

The paper is intended for IT Architects, Backup and Recovery Administrators, and virtualization teams at medium size through Enterprise-scale organizations.

The hosts of the hangout are:

Matt Stephenson (@PackMatt73) Product Marketing Manager; Social Media

Mahmoud Magdy (@_busbar) Senior Technical Architect, Exchange Server MVP, BExpert
Thomas Maurer (@ThomasMaurer) Cloud Architect, Microsoft MVP
Mikko Mykyri (@BackupMikko) VMware vExpert 2012, Backup Exec Product Manager

Important links:

@BackupExec
Be Busbared (Blog)
thomasmaurer (Blog)
Mikko Nykyri  (Blog)
Backup and Recovery Five Critical Decisions Whitepaper

The Hangout

You can click on the links to jump to that part of the hangout.

  1. Agent based vs Agentless
    image
  2. Purpose built virtual domain backup tool or unified data protection?
    image
  3. Managing deduplication: Why, where and how?
    image
  4. Managing the recovery trade-off
    image
  5. Performance, reliability and manageability at future scale
    image

If you have any questions regarding this hangout, hit up Matt on twitter (@PackMatt73) or use #SYMChangout and he will get back to you

@PCVirus_AU
Titan Solutions

A good hard look at the Backup Exec 3600 Appliance

On the 27th of April 2013, the Backup Exec guys hosted another hangout, this time about their new Backup Exec 3600 Appliance.

This was a great hangout that really broke down what the 3600 appliance is and does.

Unfortunately there was a brief drop out of Google Hangouts for about 20 seconds at the 22:44 mark

My main take away from the whole thing was how easy it is to install and get backing up, 33 minutes! (and that includes 5 minutes for unpacking and 18 minutes for rebooting)

The hosts of the hangout are:

Matt Stephenson (@PackMatt73) Product Marketing Manager; Social Media
John Damon, Product Marketing Manager; Backup Exec 3600 Appliance
Michael Gallagher, Product Manager; Backup Exec 3600 Appliance
Mike Garcia

Important links:

@SYMCPartners
@BackupExec
The Symantec Backup Exec 3600 Appliance- evaluating the Out-of-Box Experience

The Hangout

You can click on the links to jump to that part of the hangout.

Backup and Recovery Got you Down?

image

Licensing

image
Licensing Link: http://www.symantec.com/docs/HOWTO59010

Appliance Overview

image

Intel Relationship

image

Essential Protection Suite vs Total Protection Suite

image

Google Hangouts drop out Sad smile

image

Google Hangouts resumes Smile

Under the hood

image

Out of box experience

image

P2V conversion

image

Deduplication

image

Scenarios

  1. Single Site
    image
  2. Sister Site and Remote Office
    image
  3. Virtual Environment
    image

If you have any questions regarding this hangout, hit up Matt on twitter (@PackMatt73) or use #SYMChangout and he will get back to you

@PCVirus_AU
Titan Solutions

Announcing the Hangout with Backup Exec 2012 Engineers series

Better Backup For All

Backup Exec has just announced that they are starting a series of Google+ Hangouts with Backup Exec 2012 engineers starting Wednesday 12th June 2013, starting at 1pm EDT, which makes it about 3am Thursday morning Australian Eastern Standard Time.

I think this is a great way to get your questions answered by the guys who really know BE better then anyone else and I am sure that if you support Backup Exec you have some questions or ideas that you would like to pass onto the engineers.

Below is the info from Facebook and Google+

Are you a Backup Exec user?  Do you ever have wild ideas about how you could better use this solution?  Ever run into a technical issue?  How would you feel about Hanging Out for an hour with a Systems Engineer & a Technical Support Engineer to go through whatever is on your mind regarding Backup Exec?
Backup Exec is pleased to announce a series of Google+ Hangouts beginning Wednesday 12 June at 1.00 pm EDT/10.00 am EDT
These hangouts will be open forums with customers, partners, and employees addressing any questions or concerns regarding Backup Exec 2012.  Our featured technical experts will be Systems Engineer Travis Larson and Technical Support Engineer Michael McNally.  They will be here to take your questions and suggestions and talk with you about all things Backup Exec.
Come Hangout with us.  Like Bill Cosby said “if you’re not careful, you may learn something before it’s done.”

Make sure you click on the Google+ Event Invite and say your going to attend!

@PCVirus_AU
Titan Solutions